Gates – Tas Rural Supplies

Cyclone 20ft N-Stay Gate

eforujmy — Sat, 13 Jan 2024 05:02:09 +0000

Welded mesh insert features graduated horizontal wires which increase the density of the strands in the lower part of the gate.
Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out, providing corrosion resistance.
Top and bottom 3mm plate steel gusset adds vertical load carrying capacity at free swinging end of the gate, reducing gate sag increasing ability to absorb downward pressure from larger livestock.
Full notch weld construction for added strength.

Cyclone 12ft N-Stay 1800 High Exclusion Farm Gate

eforujmy — Sat, 13 Jan 2024 04:57:28 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).

Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges.

Top and bottom 3mm plate steel gusset adds vertical load carrying capacity at free swinging end of the gate, reducing gate sag increasing ability to absorb downward pressure from larger livestock.

Full notch weld construction for added strength.

Cyclone 5ft Farm Gate

eforujmy — Sat, 13 Jan 2024 04:56:24 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
Full notch weld construction.

Cyclone 4ft Farm Gate

eforujmy — Sat, 13 Jan 2024 04:56:21 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
Full notch weld construction.

Cyclone 3ft Entry Farm Gate

eforujmy — Sat, 13 Jan 2024 04:56:19 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
Full notch weld construction.

Cyclone 16ft Vertical Brace Farm Gate

eforujmy — Sat, 13 Jan 2024 04:49:19 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
Full notch weld construction.

Cyclone 6ft Farm Gate Vertical Brace

eforujmy — Sat, 13 Jan 2024 04:49:17 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
Full notch weld construction.

Cyclone 3ft Entry Gate Small Mesh 850mm

eforujmy — Sat, 13 Jan 2024 04:47:59 +0000

Produced from 20NB heavy galvanised pipe both inside and out providing corrosion resistance.
100mm x 50mm x 4.0mm mesh infill.
Welded collar included for universal gate hardware fitment.

Cyclone 8ft Vertical Brace Farm Gate

eforujmy — Sat, 13 Jan 2024 04:43:24 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
Full notch weld construction.

Cyclone 8ft N-Stay Farm Gate

eforujmy — Sat, 13 Jan 2024 04:43:08 +0000

Welded mesh insert features graduated horizontal wires which increase the density of the strands in the lower part of the gate.
Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out, providing corrosion resistance.
Top and bottom 3mm plate steel gusset adds vertical load carrying capacity at free swinging end of the gate, reducing gate sag increasing ability to absorb downward pressure from larger livestock.
Full notch weld construction for added strength.