Fencing – Tas Rural Supplies

Murray Stiff Stay 13/90/15 100m

eforujmy — Tue, 12 Nov 2024 03:53:26 +0000

Highly engineered, tight cross-over Stiff Stay knot
Murray Stiff Stay prefabricated fencing is made exclusively on the Stiff Stay machine at our Albury Manufacturing facility in regional Australia.
Murray Stiff Stay specifically designed to protect by providing a barrier against smaller marsupials, dogs, pigs and feral animals.
Stiff Stay Exclusion Fencing is produced with graduated line wire spacings. The tighter 15cm stay spacings further improve its ability to withstand impact.
Available in:

Heavily Galvanised to AS/NZS4534

Narrow 15cm picket spacings
2.80mm high tensile top and bottom wires for added strength
2.50mm high tensile line wires and 2.50mm picket wires

Whites FarmPost Star Picket Black 165cm

eforujmy — Tue, 12 Nov 2024 03:51:29 +0000

Mid-weight economical post
Farmpost is a mid-weight economical post for multiple applications.
Standard pre-punched holes and pointed ends. Available in black bituminous coating

Cyclone 20ft N-Stay Gate

eforujmy — Sat, 13 Jan 2024 05:02:09 +0000

Welded mesh insert features graduated horizontal wires which increase the density of the strands in the lower part of the gate.
Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out, providing corrosion resistance.
Top and bottom 3mm plate steel gusset adds vertical load carrying capacity at free swinging end of the gate, reducing gate sag increasing ability to absorb downward pressure from larger livestock.
Full notch weld construction for added strength.

Bullmax 4 Stroke Post Driver Honda Engine

eforujmy — Sat, 13 Jan 2024 05:00:22 +0000

IT IS POWERED BY THE HONDA GX35 ENGINE, DEVELOPING 1 KW OF POWER AND 1.60NM OF TORQUE.

IT HAS BEEN ASSEMBLED AND TESTED IN AUSTRALIA.

WITH ITS ANTI- VIBRATION HANDLES, BEING LIGHT WEIGHT AND PERFECTLY BALANCED IT IS AN EASY MACHINE TO USE.

THE BULLMAX POST DRIVER GIVES YOU VERSATILITY WITH 4 INTERCHANGEABLE SLEEVE HEADS. 45MM, 55MM, 73MM, AND 80MM THUS ALLOWING YOU TO KNOCK IN, STANDARD AND MAXI STAR PICKETS, PIPE AND GROUND RODS.

WITH AN IMPACT PLATE OF 80-MM IN DIAMETER IT ALLOWS THE POST DRIVER TO KNOCK IN PIPE UP TO 50MM WITHOUT USING A DOLLY, THUS REDUCING DAMAGE TO THE TOP OF STAR PICKETS.

THE BULLMAX POST DRIVER COMES CONVENIENTLY PACKED IN IT IS OWN CUSTOMISED CARRY CASE FOR SAFE KEEPING.

WITH NO NEED FOR A COMPRESSOR AND AIR HOSE TO OPERATE YOUR POST DRIVER, THE BULLMAX BMPD-H35 POST DRIVER WITH A HONDA GX35 ENGINE IS SO VERSATILE THAT IT CAN BE USED ANYWHERE.

Southern Wire Horse Fence 10/90/5 100m

eforujmy — Sat, 13 Jan 2024 04:59:20 +0000

Used extensively throughout horse studs and properties, the Southern Wire Fastlock HorseFence is renowned as the fence that offers ultimate security and protection for equine property.

The unique knot used to join the high tensile wires is strong enough to withstand animal impact, yet is smooth on both sides, preventing your horse from being injured when rubbing on the fence.

The closely spaced 5cm by 10cm openings to prevent horses from stepping through or becoming tangled in the fence.

Southern Wire HorseFence provides:

Longevity – Manufactured in Australia using high quality, heavy galvanised wire.
Safety – Compact, smooth knot minimises possibility of injury if horses rub against the fence.
Protection – Crimped line wires allows the fence to absorb pressure and reduce injury risk.
Peace of Mind – 5cm x 10cm spacing prevents horses becoming tangled in the fence.

Gallagher M6000i Mains Energizer 35km

eforujmy — Sat, 13 Jan 2024 04:58:44 +0000

With the brute force of 60 stored joules and the peace of mind of the intelligent i Series system, your fence performance is monitored 24/7, alerting you to issues before they become a crisis.

The M6000i will deliver more power to the back of the farm than any other Energizer. Suitable for fencing all types of animals, on farms up to 600 acres or 240 hectares.

A better view of your fence

Simply connect your i Series Energizer to an App Gateway, use Bluetooth to sync to the i Series Ag Devices App and fence data will be sent straight to your pocket.

Warranty: 3 years

Cyclone 12ft N-Stay 1800 High Exclusion Farm Gate

eforujmy — Sat, 13 Jan 2024 04:57:28 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).

Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges.

Top and bottom 3mm plate steel gusset adds vertical load carrying capacity at free swinging end of the gate, reducing gate sag increasing ability to absorb downward pressure from larger livestock.

Full notch weld construction for added strength.

Cyclone 5ft Farm Gate

eforujmy — Sat, 13 Jan 2024 04:56:24 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
Full notch weld construction.

Cyclone 4ft Farm Gate

eforujmy — Sat, 13 Jan 2024 04:56:21 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
Full notch weld construction.

Cyclone 3ft Entry Farm Gate

eforujmy — Sat, 13 Jan 2024 04:56:19 +0000

Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
Full notch weld construction.